Shenyang ABT Drilling Equipment Co., Ltd.
En
  • nrc-reverse-circulation-hammer-1.jpg
  • nrc-reverse-circulation-hammer-2.jpg
  • nrc-reverse-circulation-hammer_1552894340.jpg
NRC Reverse Circulation Hammer

NRC Reverse Circulation Hammer

Transannular counter-circulation impactor is also called hollow type impactor, the center is through the round hole, can obtain the complete core or the block larger rock sample.
The working principle is similar to that of ordinary percussion equipment, and it is matched with special reverse circulation bit, which is applied to air reverse circulation continuous sampling impact drilling.
NRC reverse circulation impactor series is the latest reverse circulation impactor developed by our company, which is mainly used for deep hole exploration and drilling and obtaining core samples.
  • Product Description
  • Specification
It has the following advantages:
1. According to the previous experience of ordinary percussion equipment, combined with the trial characteristics of the counter-circulation impactor, optimize the internal structure to make the ability transfer ideal, so as to guarantee the fast drilling speed of this series of impactor and the steady continuous sampling.
2. The internal structure is very simple and the parts are rigid, which ensures long life of the impactor and easy maintenance.
3. The acquisition pipe is one-piece, which can be replaced without removing the impactor.
The acquisition pipe is carburized, so it has good wear resistance.
4. The matching bit adopts the patented design, only the bit needs to be replaced, the same impactor can drill holes of different sizes, and the sample can be guaranteed free from contamination.
5. Under various difficult conditions such as loose soil, hard rock and plenty of water, the sampling work can be completed well.
NRC Reverse Circulation Hammer
Item Description Weight(kg)
NRC45 NRC55 NRC65 NRC52
1、Internal Ciclip 0.03 0.04 0.05 0.04
2、Air Screen 0.35 0.44 0.65 0.44
3、Top Sub 6.5 9.65 20 9.65
4、“O”Ring 0.01 0.02 0.02 0.02
5、Sample Tube 5.1 6.72 12.5 6.75
6、Check Valve 0.25 0.68 0.85 0.68
7、Spring 0.04 0.12 0.1 0.12
8、“O”Ring 0.01 0.02 0.02 0.02
9、Air Distributor 0.85 1.48 3.5 1.48
10、“O”Ring 0.02 0.01 0.02 0.01
11、Internal Cylinder 2.2 4.12 4.2 4.12
12、Piston 8.5 16.9 24 16.9
13、External Cylinder 14.5 19.5 32 21.5
14、Guided Sleeve 1.2 0.9 5.5 1.9
15、“O”Ring - - - 0.02
16、Stop “O”Ring - - - 0.01
17、Stop Ring - - - 0.32
18、Sharout - - - 1.86
19、Drive Chuck 3.2 5.65 6.5 4.17
20、Bit Retaining Pin 0.01 0.15 0.3 -
21、Drill Bit 10.5 15.8 31 11.05
 
Technical Data
Length(Without Bit) NRC45 NRC55 NRC65 NRC52
1020mm 1111mm 1250mm 1208mm
Weight(Without Bit) 94.00 kg 66.50 kg 110.00kg 70.00kg
External Diameter Ø99mm Ø126mm Ø146mm Ø126mm
Bit Shank NRC45 NRC55 NRC65 PR52
Hole Range Ø114-Ø127mm Ø133-Ø15mm Ø155-Ø190mm Ø133-Ø146mm
Connection Thread Custom support Custom support Custom support Custom support
Working Pressure 1.0-3.0Mpa 1.5-3.5Mpa 1.5-3.5Mpa 1.5-3.5Mpa
Impact Rate at 17 Bar 30HZ 35HZ 28HZ 35HZ
Recommended Rotation Speed 25-40 r/min 25-40 r/min 25-40 r/min 25-40 r/min
Air Consumption 1.0Mpa:8m³/min 1.7Mpa:16m³/min 1.7Mpa:20m³/min 1.7Mpa:16m³/min
1.8Mpa:12m³/min 2.4Mpa:22m³/min 2.0Mpa:26m³/min 2.4Mpa:22m³/min
2.4Mpa:16m³/min 3.0Mpa:28m³/min 3.0Mpa:35m³/min 3.0Mpa:28m³/min
 
Leave a Message
Related Products
CONTACT
Tel:+86-13889196063
Add:No. 95-2, blacksmith Road, Hunnan District, Shenyang, Liaoning