Shenyang ABT Drilling Equipment Co., Ltd.
  • automatic-mapping-water-detector-pqwt-tc1200-1_1547689318.jpg
  • automatic-mapping-water-detector-pqwt-tc1200-2.jpg
  • automatic-mapping-water-detector-pqwt-tc1200-3.jpg
  • automatic-mapping-water-detector-pqwt-tc1200-4.jpg
Automatic Mapping Water Detector ANBIT-TC1200

Automatic Mapping Water Detector ANBIT-TC1200

ANBIT-TC series automatic mapping water detector is based on the Earth's electromagnetic field as the field source, based on the difference in the conductivity of different underground geological structures, and by studying the variation law of the electric field components at different frequencies to study the geological structure and changes, to find groundwater resources by scientific method. Changes in geological structure are displayed in real-time through multiple curves. Automatic form mapping geological profile by one key operate easily, get rid of complicated computer graphics. The site can quickly understand the geological structure through the automatic mapping curve and profile, and analyze specific information such as aquifers, fractures, faults, and karst caves.The instrument is widely used in the rapid analysis of geological structure changes in different terrains such as plains, hills, mountains, plateaus, and basins to determine well locations, aquifers, and aquifer depth.
  • Product Description
  • Specification


  • Main switch
  • Power light
  • Test light
  • Systerm reset button
  • MNport
  • Memory care
  • USB port
  • LCD touch screen
  • Battery holder
  • Copper electrode
  • Alloy electrode bar
  • MN Plug
  • Electrode cable


1. Apply to multiple and complex terrain exploration
2. The instrument can automatic mapping and get result on site
3. Profile map shows aquifer and depth
4. Expert remote assistance to analysis well location
5. Inexperienced people can learn the operation in 5 minutes
6. Selected the depth according to your demand, 600/900/1500M

Wiring Method

(M N are the electrode, O is the measurement point, Point distance is 1-5m)
The data collected by the instrument each time is the midpoint data between the two electrodes. The electrode distance is 10m, and the distance between points is generally 1-5m (the standard is 1m). Electrode spacing and point spacing must keep the same distance for one measuring line. As the left picture shows.
Model No. Depth Frequency Channel System Units of measurement Measurement Range Power Supply
PQWT-TC1200 600/900/1500M Single, Triple, 30,48,62,98 Customized Freq 8 PQWT △Vs(mV) 0mV-2000mV #26650 4000mAh
2*Rechargeable lithium battery 

Model No. Depth Accuracy Channel Frequency LCD PS Other
POWT.TC700 150 meters
300 meters
500 meters
600 meters
0.001mv 8 Single,
68 Frequency
800x480 Touch
Controllable power supply 1. Automatic noise reduction;
2. User-friendly interactive interface high-speed CPU control and menu prompts;
3. Automatic measurement and storage of data drawing curve;
4. The data will be saved automatically after the shutdown;
5. The data will be saved automatically after power off;
6. It can store 999 measuring lines data and record 999 measuring points data each;
7. The data could be imported into computer directly for charting;
8. Using rechargeable batteries, stand by time more than 12 hours;
POWT-TC900 150 meters
300 meters
1200 meters
0.001mv 8 Single,
68 Frequency
800x480 Touch
Controllable power supply
PQWT.TC1200 600 meters
900 meters
1500 meters
0.001mv 8 Single,
Custom 98 Frequency
800x480 Touch
Controllable power supply
Leave a Message
Related Products
Add:No. 95-2, blacksmith Road, Hunnan District, Shenyang, Liaoning